It features a new generation of innovative lightweight Class D amplifiers, utilising revolutionary 96kHz DSP technology to give operating efficiency in excess of 90%. A Powercon connector provides mains input to the auto-sensing switch mode power supply, and 3-pin XLRs are used for input and parallel link signal connections. RJ45 network connectors enable multiple loudspeakers to be controlled and monitored over a BVNet network using TurboDrive™ software.
The TA-500tDP cabinet is trapezoidally shaped with side angles optimised for arraying and close packing and includes an integral rigging system allowing the assembly of simple two-wide and three-wide arrays of cabinets. An optional removable, stackable wheelboard clips on to the front of the cabinet for transportation
Net Weight 61kg (134.2 lbs)
Dimensions 977mm x 574mm x 498mm (38.5" x 22.6" x 19.6")
Components 1 x custom 15" (381mm) LF driver, 1 x custom 10" (254mm) MF driver on a midrange Polyhorn™, 1 x custom HF driver on a high frequency Polyhorn™
Frequency Response 60Hz - 20kHz ±4dB (with DSP)
Dispersion 50°H x 25°V; horizontal array angle: 45°
Maximum SPL 135dB continuous, 141dB peak
Construction 15mm (5/8") and 18mm (3/4") birch plywood throughout; rebated, screwed and glued. Finished in black semi-matt textured paint. Two recessed grab handles. Integral flying hardware. Detachable wheelboard.
Grille 2mm powder coated perforated mild steel backed with reticulated foam
Connectors Input: (1) XLR female, Link: (1) XLR male, pin 2 hot; Neutrik Powercon; (2) RJ45 network port
Flying Hardware Integrated
Spares & Accessories MG-500 Replacement cloth/expanded metal grille
LS-1527 15" (381mm) LF loudspeaker
RC-1527 Recone kit
LS-1021.2 10" (254mm) HMF loudspeaker
RC-1021.2 Recone kit
CD-113 Replacement HF diaphragm
RD-113 HF driver