The TFA-600L utilises the same low frequency drive unit as the larger TSW-218, and employs the same loading techniques so these two bass enclosures can freely be mixed in any application. The enclosure is equipped with an integrated flying system which enables it to be flown at the top of a column of Flex Array loudspeakers using a simple conversion frame between the bass enclosures and mid/highs.The same conversion frame is also used to provide a stable Flex Array groundstack. A threaded pole mount socket is fitted for use with flying yokes.
The 15mm birch plywood cabinet is equipped with recessed handles on the sides and back, and is supplied with heavy duty wheels in order to aid trucking and handling. A recessed panel at the rear of the cabinet carries two parallel-linked Speakon NL4 connectors for input and loop-through connections.
Full specifications
Net Weight 72.5kg (159.5lbs)
Dimensions 574mm x 710mm x 848mm (22.6" x 28" x 33.4")
Components 1 x custom 18” (457mm) LF driver
Frequency Response 38Hz - 150Hz ±3dB, 30Hz - 150Hz ±10dB
Power Handling 800 watts r.m.s., 1600 watts program
Sensitivity 104dB; 110dB with 16 units
Maximum SPL Single enclosure: 133dB continuous (calculated SPL addition), 139dB peak
Impedance 8 ohms
Construction 15mm (5/8”) birch plywood throughout; heavily braced, rebated, screwed and glued. Finished in black semi-matt textured paint. Eight recessed carrying handles.
Grille 2mm powder coated perforated mild steel backed with reticulated foam
Connectors (2) Neutrik Speakon NL4MP, wired pin1+: positive, pin1-: negative; pin2+ and pin2-: n/c
Flying Hardware Integrated flyware
Spares & Accessories LS-1815 18” (457mm) LF loudspeaker
RC-1815 Recone kit
MG-600L Replacement metal grille
T4 wheels Heavy duty wheels