It combines a Dendritic HF waveguide and a midrange Polyhorn™ together in a single physically aligned, equal path length waveguide with 75° horizontal dispersion, ensuring a phase-coherent wavefront at the horn mouth. The TFA-600HDP is a networkable, digitally self-powered loudspeaker featuring innovative lightweight Class D amplifiers which utilise revolutionary 96kHz DSP technology to give operating efficiency in excess of 90%. Independent amplifier channels power the LF and MF/HF drivers separately. A Powercon connector provides mains input, and 3-pin XLRs are used for input and parallel link signal connections. RJ45 network connectors enable multiple loudspeakers to be controlled and monitored over a BVNet network using TurboDrive software.
The enclosure features both vertical and horizontal integrated flying systems in order to facilitate flown and ground-stacked line array configurations, or single box and virtual point source applications. A flight-cased trucking system allows three cabinets to be pre-rigged and transported together.
The 15mm birch plywood cabinet is equipped with eight recessed handles on the sides, rear, top and bottom.
Full specifications
Net Weight 44kg (96.8lbs)
Dimensions 710mm x 304mm x 560mm (28" x 12" x 22")
Components 2 x custom 10" (254mm) LMF driver, 1 x custom 6.5" (165mm) HMF driver on a midrange Polyhorn™, 1 x custom HF driver on a high frequency Dendritic device
Frequency Response 90Hz - 18kHz ±3dB, 80Hz - 20kHz ±10dB
Dispersion 75°H x 16°V @-6db points
Maximum SPL 130dB continuous (calculated SPL addition), 136dB peak
Construction 15mm (5/8") birch plywood throughout; rebated, screwed and glued. Finished in black semi-matt textured paint. Eight recessed carrying handles
Grille Powder coated perforated steel with reticulated foam backing
Connectors Input: (1) XLR female, Link (1) XLR male, pin 2 hot; (1) male Neutrik Powercon; (1) female Neutrik Powercon; (2) RJ4N network ports
Flying Hardware Integrated flyware
Spares & Accessories LS-1025 10" (254mm) LMF loudspeaker
RC-1025 Recone kit
LS-6507.2 6.5" (165mm) HMF loudspeaker
CD-117 HF driver
RD-117 Replacement diaphragm
TFA-600HDP AMP Replacement amplifier
MG-600H Replacement metal grille